top of page

Lampshade Standard Shapes & Sizes

Berry & Grouse has an extensive range of standard shapes and sizes. If you need a bespoke size, please get in contact.

DRUM

  • Most popular shape

  • Ringset diameter sizes start from 10cm up to 70cm (for larger lampshades please get in contact)

  • Circular ringsets with equal diameter top and bottom

  • Vertical sides showing no signs of a slope

  • Fitting ring approx. 4.5cm internal height

  • Custom heights available on all our drum ringsets (additional cutting fees apply)

  • Available on a standard bayonet (UK fitting) and Duplex frame (for use with shade carrier or spider fitting). Our drum lampshades will connect with UK and European Lampholders or Pendant Fittings, and also USA Harp & Finial fittings by using a Duplex Converting Kit (please get in contact prior to purchase for advise on USA Harp and Finial lampshades)

  • Easy to remove converter ring for European lamp fittings

​

Ringsets available in the following sizes:

10cm, 15cm, 20cm, 25cm 30cm,35cm, 40cm, 45cm and 70cm diameters

OVAL

  • Great for saving space as less intrusive

  • Diameter sizes start from 20cm diameter up to 40cm

  • Oval ringsets with equal diameter top and bottom

  • Verical sides

  • Fitting ring approx. 4.5cm internal height

  • Custom heights available on all our oval ringsets (additional cutting fees apply)

  • Available on a standard bayonet (UK fitting) or remove the converter ring for European lamp fittings

​

Ringsets available in the following sizes:

20cm diameter x 13cm diameter x 15cm high

30cm diameter x 22cm diameter x 20cm high

40cm diameter x 30cm diameter x 25cm high

CANDLE CLIP

  • Fits over a candle bulb - not suited to a regular utility fitting due to the narrow top ring of the shade. Fits onto a tall narrow candle bulb

  • Suitable for chandeliers, wall lights and tall Recency-style table lamp bases

  • Works best with smaller fabric patterns. Horizontal patterns will not align and will curve upwards around the shade.

  • The tapered style means the light will emit downwards from the larger bottom ring with little light emitting from the top.

  • Smaller top ring with wider bottom ring and steep height

  • Candle Clip 14.5cm diameter bottom ring x 13cm (5") high x 7.7cm (3") diameter top ring (5.1cm/2" internal clip fitting) - very small lampshade suitable for small lamp stands, chandeliers or wall lights. Clips over a standard candle bulb.

Assembled size 14.5cm diameter (bottom ring) x 13cm high x 7.7cm diameter (top ring with 5.1cm internal clip fitting)

EMPIRE

  • Also known as Retro Empires or Tapered

  • These lampshades feature a smaller top ringset with a larger bottom ringset and deep gradient in height

  • Sloped sides 

  • The larger sizes make a great statement lampshade for standard lamps

  • Horizontal patterns will not align and the pattern will curve upwards around the lampshade

  • Comes with a duplex frame suitable for shade carriers or spider fittings

  • All empire lampshades are made using a duplex ringset and requires the use of a spider fitting for a ceiling pendant and a shade carrier/harp fitting for table and standard lamps. Different shade carrier heights available (standard carriers heights available 4", 6" 8", 1)

  • Our Empire lampshades will connect with UK and European Lampholders or Pendant Fittings, and also USA Harp & Finial fittings by using a Duplex Converting Kit (please get in contact prior to purchase for advise on USA Harp and Finial lampshades)

  • Bespoke sizes available upon request (additional cutting fees apply)

​

Available in the following sizes:

25cm Diameter Bottom Ring

20cm Diameter Top Ring Duplex

20cm High

​

30cm Diameter Bottom Ring

25cm Diameter Top Ring Duplex

25cm High

​

35cm Diameter Bottom Ring

30cm Diameter Top Ring Duplex

30cm High

​

40cm Diameter Bottom Ring

35cm Diameter Top Ring Duplex

35cm High

IMG_2941.jpg

Conical

  • Small top ring with large bottom ring and slope gradient

  • Available in 4 sizes: 25cm diameter, 30cm diameter, 45cm diameter and 50cm diameter. 

  • Only available on a Duplex fitting suitable for shade carrier or spider fitting (supplied with purchase)

  • Suitable for UK and European fittings

  • Our Conical lampshades will connect with UK and European Lampholders or Pendant Fittings, and also USA Harp & Finial fittings by using a Duplex Converting Kit (please get in contact prior to purchase for advise on USA Harp and Finial lampshades)

  • Horizontal patterns will not align straight and will curve upwards around the lampshade

  • Due to the deep 'U'-shaped panel, this shape may not be suitable for certain fabric patterns

  • Bespoke sizes available upon request (additional cutting charges apply)

Assembled size:


Bottom Diameter - 25cm
Height - 16cm
Slope Length - 17.18cm

Top Diameter - 12.5cm

​


Bottom Diameter - 30cm
Height - 20cm
Slope Length - 21.36cm

Top Diameter - 15cm

​


Bottom Diameter - 45cm
Height - 25cm
Slope Length - 27.95cm

Top Diameter - 20cm

​


Bottom Diameter - 50cm
Height - 30cm
Slope Length - 32.5cm

Top Diameter - 25cm

​

IMG_2415.jpg

Square

  • Available in three sizes

  • Square shaped lampshade with rigid edges

  • Straight sides with all sides the same width

  • Custom heights available (additional cutting fees apply)

  • Standard bayonet UK fitting or remove the converter plug for European fittings

Ringsets sizes available:

20cm Square x 20cm High

30cm Square x 30cm High

40cm Square x 40cm High

Rounded Square

  • Available in three sizes

  • Square shaped ringsets with curved edges

  • Straight sides with all sides the same width

  • Custom heights available (additional cutting fees apply)

  • Standard bayonet fitting for UK lamps or remove the converter plug for European lamps

Ringsets sizes available:

20cm x 20cm x 18cm High

30cm x 30cm x 21cm High

40cm x 40cm x 25cm High

Rounded Rectangle

Lewis & Wood Sporting Hunt

  • Rectangle shaped ring sets with rounded edges

  • Standard bayonet cap for UK fittings. Remove the converter plug for European lamp fittings

  • Custom heights available (additional cutting charges apply)

Assembled size:

20cm x 10cm x 18cm High

30cm x 15cm x 21cm High

40cm x 20cm x 25cm High

 

15-2-19-0541.jpg

Tiered Ceiling

  • Suitable for ceiling pendants only

  • Drum ringsets that trail downward.

  • Multiple diameters and combinations available.

  • Available in custom drop down options and heights (bespoke sizes available upon request)

  • 3 different tier options

2 tiered sizes:

30cm/20cm

40cm/30cm

50cm/40cm

60cm/50cm

70cm/60cm

3 tiered sizes:

40cm/30cm/20cm

50cm/40cm/30cm

60cm/50cm/40cm

70cm/60cm/50cm

4 tiered sizes:

50cm/40cm/30cm/20cm

60cm/50cm/40cm/30cm

70cm/60cm/50cm/40cm

​

FE4CED19-1997-401E-8EF0-998723221AF9.jpe

Cylinder Table/Floor Lamps

  • Available in six ringset sizes

  • Cylinder shape lampshade for floor or table lamps

  • Circular ringsets the same diameter. Bottom ring with built-in stand and 3 x white plastic feet covers

  • Elongated cylinder lampshade

  • Custom heights available (additional cutting fees apply)

  • Lamp fitting included - Features a white fitted plug with 3A fuse, in-line switch suitable for Standard B22 light bulbs. Cable specifications: Cable length 2meters, (Twin 2x0.75mm²) , switch is spaced 80cm to fitting then 120cm to socket. Fully tested in compliance with EU legislation for health and safety.

Standard Sizes:

Small Table: 15cm Diameter x 38cm high

Large Floor: 20cm diameter x 74cm high

​

Ringset sizes available:

15cm

20cm

25cm

30cm

35cm

40cm

Lampshade Accessories

IMG_2710.jpg

SHADE CARRIER - for table/standard lamps for use with our duplex lampshade frames (the correct carrier will be provided with your order): 

4”

5”

6”

7”

8”

9”

10”

12”

 

 

SPIDER FITTING - for use with duplex frames for ceiling pendant position. Suitable for E27/E26 to B22/E14 Lampshade Reducer / Converter Adapter to reduce the aperture so it can fit UK lamp holders. A 4mm top quality heavy gauge wire. epoxy coated /painted white  to preven rust.

​

CONVERTER PLUG - Lampshade Reducer / Converter Adapter fits inside the ring to reduce the aperture so it can fit UK lamp holders. This can be easily removed. 

Lampholder Types:
B22 Bayonet Cap  Lampholders (UK) -   Adaptor Fitted
E14 Edison Screw Lampholders  (EU)    Adaptor Fitted
E27 Edison Screw Lampholders  (EU)    Adaptor Removed
E26 Edison Screw Lampholder    (US)    Adaptor Removed

​

Duplex Converting Kit - For USA Harp & Finial fittings. A three part system comprising of:

  • Spider Fitting - Lamp Shade Duplex Adaptor

  • E27/E26 to B22/E14 Lampshade Reducer / Converter Adapter

  • Converting Washers - centre hole size 110mm

(There are two standard sizes for Harp systems, 1/4" and 3/8" our Converting Washers will fit them both. 

Conversion chart with imperial and metric measurements.

Inches    Metric
1/4"     6.35 mm
5/16"   7.95 mm
3/8"     9.53 mm
Our system works with these sizes, but If the Harp stem is bigger, you can make the hole in the washer bigger to fit.)

​

B22 LAMPHOLDER (UK) - used with all our cylinder lamps:

Features:

  • Fitted plug with 3A fuse

  • Includes fitted in-line switch 

  • Standard B/C  B22 lamp holder

  • Colour White

Specifications:

  • Cable length 2mtrs  (Twin 2x0.75mm²)  

  • Switch is spaced 80cm to fitting then 120cm to socket.

  • Fully tested in compliance with EU legislation for health and safety.

bottom of page